Rosemount罗斯蒙特398VP398/398VP/398R/398RVP传感器398 pH/ORP 传感器

Rosemount™ 398VP pH/ORP 传感器398/398VP/398R/398RVP
Rosemount™ 398 pH/ORP 传感器398/398VP/398R/398RVP
Rosemount罗斯蒙特398VP pH/ORP 传感器398 pH/ORP 传感器398/398VP/398R/398RVP
Rosemount™ 398 pH/ORP 传感器398/398VP/398R/398RVP
Rosemount 398 采用 Tefzel® 和钛质抗化学腐蚀结构、以及取得**的 TUpH™ 参比液接，使之成为测量苛刻过程液体 pH 值的理想传感器。该传感器用于测量酸性水汽提塔、纸浆漂白塔（使用二氧化）以及含有各种**溶剂过程流体的 pH 值。
规格
测量范围 pH：0 至 14 
ORP：-1500 至 +1500 mV
环境温度 100°C (212°F) 下 250 psig (1825 kPa)
功能
凭借优越的抗化学腐蚀性能，传感器能够在含有二氧化以及多种**溶剂和氧化剂的应用中经受住考验
采用 TUpH 参比电技术，该技术可确保延长传感器在易覆着、易结垢和易中毒的过程中的使用寿命，因此大限度减少了传感器维护需求
采用可阻止参比电中毒的螺旋结构参比路径以及防裂玻璃，大限度延长了传感器的使用寿命

Rosemount™ 398VP pH/ORP 传感器
Rosemount 398R 采用 Tefzel™ 和钛质抗化学腐蚀结构、以及取得**的 TUpH™ 参比液接，使之成为测量苛刻过程液体 pH 值的理想传感器。该传感器用于测量酸性水汽提塔、纸浆漂白塔（使用二氧化）以及含有各种**溶剂过程流体的 pH 值。
规格
测量范围 pH：0 至 14 
ORP：-1500 至 +1500 mV
环境温度 100°C (212°F) 下 250 psig (1825 kPa)
功能
凭借优越的抗化学腐蚀性能，传感器能够在含有二氧化以及多种**溶剂和氧化剂的应用中经受住考验
采用 TUpH 参比电技术，该技术可确保延长传感器在易覆着、易结垢和易中毒的过程中的使用寿命，因此大限度减少了传感器维护需求
采用可阻止参比电中毒的螺旋结构参比路径以及防裂玻璃，大限度延长了传感器的使用寿命
Variopol (VP8) 电缆连接件选项可将电缆与传感器断开，消除电缆扭结。
规格
测量范围 pH：0 至 14 
ORP：-1500 至 +1500 mV
环境温度 100°C (212°F) 下 250 psig (1825 kPa)
功能
凭借优越的抗化学腐蚀性能，传感器能够在含有二氧化以及多种**溶剂和氧化剂的应用中经受住考验
采用 TUpH 参比电技术，该技术可确保延长传感器在易覆着、易结垢和易中毒的过程中的使用寿命，因此大限度减少了传感器维护需求
采用可阻止参比电中毒的螺旋结构参比路径以及防裂玻璃，大限度延长了传感器的使用寿命
Variopol (VP8) 电缆连接件选项可将电缆与传感器断开，消除电缆扭结。
Product Data Sheet
00813-0100-3398, Rev AB
November 2019
Rosemount™
 398/398VP/398R/398RVP
TUpH®
 pH/ORP Sensors
TUpH sensors for your tough pH/ORP applications
Rosemount TUpH pH/ORP sensors are robust sensors designed to meet a number of difficult application
requirements. Sensors feature a variety of options suited to meet a number of installation requirements
and are ideal for use in dirty, abrasive, coating, and high solid applications.
Overview
A TUpH®
 sensor design
■ Coating and fouling resistant with large surface area TUpH
reference junction.
■ Titanium and Tefzel sensor construction for superior
chemical resistance to aggressive chemicals, such as
chlorine dioxide in pulp bleaching towers and most organic
solvents.
■ Selectable O-ring options of either EPDM, Viton®
, or Kalrez®
.
■ Optional flat pH glass electrode for abrasive and coating
applications.
■ Operates in process pressures up to 250 psig.
Versatile installation options
■ Suitable for insertion/submersion type installations
(Rosemount 398/398VP).
■ Retractable design allows sensors to be removed for
calibration and maintenance without process shutdown
(Rosemount 398R/398RVP).
■ Variopol (VP8) cable connection option, for quick cable-tosensor

2 /Rosemount
Ordering information
Rosemount 398/398VP sensors are housed in a titanium tube and constructed with a
Tefzel reference junction. Sensors can be used with a 1-in. MNPT process connector
(sold separately). Rosemount 398 sensors come standard with 15-ft. (4.6 m) of
integral cable. Rosemount 398VP sensors are used with quick disconnect VP8
interconnecting cables (sold separately).
Table 1: Rosemount 398 Ordering Information
Option Description
398 pH/ORP sensor: TUpH®
Measuring electrode
10 GPHT hemi pH glass, 0 to 14 pH
12 ORP
13 GPLR flat pH glass
O-ring material
30 EPDM
31 Viton®
32 Kalrez®
Transmitter/thermocouple compatibility
54 Pt-100, for use with Rosemount 56, 1056, 1057, 1066, and 5081
Options
_ No selection, without preamplifier, 15-ft. (4.6 m) cable
62 Cable without BNC, wires directly to Rosemount 56, 1056, 1057, 1066,and, 5081
07 Without preamplifier, 4-ft. (1.2 m) cable
08 Without preamplifier, 10-ft. (3 m) cable
Calibration and conformance certificates - optional level
CC Certificate of Calibration (no test data given)
LC Loop Calibration Certificate (sensor and transmitter calibrated together, with test
data)
EC Electronic Calibration Certificate (sensor calibrated against factory instrument, with
test data)
Table 2: Rosemount 398VP Ordering Information
Option Description
398VP pH/ORP sensor: TUpH with Variopol connector
November 2019 Rosemount 398
Rosemount 398 3
Table 2: Rosemount 398VP Ordering Information (continued)
Option Description
Measuring electrode
10 GPHT hemi pH glass, 0 to 14 pH
12 ORP
13 GPLR flat pH glass
O-ring material
30 EPDM
31 Viton
32 Kalrez
Transmitter/thermocouple compatibility
54 Pt-100, for use with Rosemount 56, 1056, 1057, 1066, and 5081
Calibration and conformance certificates - optional level
CC Certificate of Calibration (no test data given)
LC Loop Calibration Certificate (sensor and transmitter calibrated together, with test
data)
EC Electronic Calibration Certificate (sensor calibrated against factory instrument, with
test data)
Note
The standard Rosemount 398VP sensor is available with an integral Variopol (VP 6.0) connector. A mating VP 6.0 connector cable is
required for use with these sensors. VP8 cable assembly works with both VP6 and VP8 sensor connectors.
Rosemount 398R/398RVP sensors are offered in 21-in. (533.4 mm) and 36-in.
(914.4 mm) titanium tube sensor lengths. You can use the sensors with a ball valve
(sold separately) for hot tap applications. Rosemount 398R sensors come standard
with 15-ft. (4.6 m) of integral or 9.5-in. (241.3 mm) for use with a sensor head
junction box (sold separately). Rosemount 398RVP sensors are SMART preamplifier
optional, and you can use them with quick disconnect VP8 interconnecting cables
(sold separately).
Table 3: Rosemount 398R Ordering Information
Option Description
398R pH/ORP sensor: TUpH retractable
Measuring electrode
10 GPHT hemi pH glass, 0 to 14 pH
12 ORP
13 GPLR flat bulb, 0 to 14 pH
Sensor length
21 21-in. (533.4 mm) titanium tube
Rosemount 398 November 2019
4 /Rosemount
Table 3: Rosemount 398R Ordering Information (continued)
Option Description
25 36-in. (914.4 mm) titanium tube
O-ring material
30 EPDM
31 Viton
32 Kalrez
Transmitter/thermocouple compatibility
54 Pt-100, for use with Rosemount 56, 1056, 1057, 1066, and 5081
Options
_ No selection, without preamplifier, 15-ft. (4.6 m) cable
60 9.5-in. (241.3 mm) cable with BNC
61 9.5-in. (241.3 mm) cable without BNC
62 Cable without BNC, wires directly to Rosemount 56, 1056, 1057, 1066, and 5081
07 Without preamplifier, 4-ft. (1.2 m) cable
08 Without preamplifier, 10-ft. (3 m) cable
Calibration and conformance certificates - optional level
CC Certificate of Calibration (no test data given)
LC Loop Calibration Certificate (sensor and transmitter calibrated together, with test
data)
EC Electronic Calibration Certificate (sensor calibrated against factory instrument, with
test data)
Note
You can mount the sensor with a ball valve or a process connector, both ordered separately.
Table 4: Rosemount 398RVP Ordering Information
Option Description
398RVP pH/ORP sensor: TUpH retractable with Variopol connector
Measuring electrode
10 GPHT hemi pH glass, 0 to 14 pH
12 ORP
13 GPLR flat pH glass
Sensor length
21 21-in. (533.4 mm) titanium tube
25 36-in. (914.4 mm) titanium tube
O-ring material
30 EPDM
31 Viton
32 Kalrez
November 2019 Rosemount 398
Rosemount 398 5
Table 4: Rosemount 398RVP Ordering Information (continued)
Option Description
Transmitter/thermocouple compatibility
54 Pt-100, for use with Rosemount 56, 1056, 1057, 1066, and 5081
55 For use with Rosemount 56, 1056, 1057, 1066, and 5081
Preamplifier option
_ No preamplifier
70 SMART preamplifier (for use with -10, -13, and -55 only)
Calibration and conformance certificates - optional level
CC Certificate of Calibration (no test data given)
LC Loop Calibration Certificate (sensor and transmitter calibrated together, with test
data)
EC Electronic Calibration Certificate (sensor calibrated against factory instrument, with
test data)
Specifications
Table 5: Percent Linearity over pH Ranges
pH range Hemi bulb Flat bulb
0 to 2 pH 94% 93%
2 to 12 pH 99% 98%
12 to 13 pH 97% 95%
13 to 14 pH 92% _
Table 6: Rosemount 398/398VP/398R/398RVP Sensor Specifications
398 398VP 398R 398RVP
Measurements and
ranges
pH: 0 to 14
ORP: -1500 to +1500 mV
Wetted materials Titanium, Tefzel™
, glass, and a choice of Kalrez®
, Viton®
, or EPDM; platinum for ORP only
Process connection None; must use 1-in. NPT process connector PN
23166-00 or 23166-01 (sold separately)
None; must use 1-in. NPT process connector or
ball valve kit (1½-in. or 1¼-in.) (sold separately)
Temperature range 32 to 212 °F (0 to 100 °C)
Pressure range: hemi
bulb
0 to 250 psig (100 to 1825 kPa [abs])
Pressure range: flat bulb 0 to 100 psig (100 to 790 kPa [abs])
Maximum pressure at
retraction or insertion
N/A N/A Option 21: 64 psig (542 kPa [abs])
Option 25: 35 psig (343 kPa [abs])
Minimum conductivity 75 µS/cm, nominal 100 µS/cm
Rosemount 398 November 2019
6 /Rosemount
Table 6: Rosemount 398/398VP/398R/398RVP Sensor Specifications (continued)
398 398VP 398R 398RVP
Weight/shipping weight 1 lb./2 lb. (0.45 kg/0.9 kg) Option 21 sensors: 2 lb./3 lb. (0.9 kg/1.4 kg)
Option 25 sensors: 3 lb/4 lb. (1.4 kg/1.8 kg)
Ball valve kits: 5 lb./7 lb. (2.25 kg/3.2 kg)
November 2019 Rosemount 398
Rosemount 398 7
Dimensional and installation drawings
Figure 1: Typical Mounting Details: Rosemount 398R Retraction Version
A. Weldalet (1½-in. FPT).
B. Junction box is optional.
C. Electrode housing tip.
D. Electrode.
E. Flow.
F. Pipe tee.
G. Pipe "Y".
Note
Sensor must be mounted at an angle between 10 ° and 90 ° above the horizontal. Pipe tees and weldalets provided by customer.
Rosemount 398 November 2019
8 /Rosemount
Recommended flow-through and insertion installation for Rosemount 398
Figure 2: Straight Flow
A. 1½-in. pipe tee with 1-in. threaded connections PN 2002011
Figure 3: Angle Flow
A. 1½-in. pipe tee with 1-in. threaded connections PN 2002011
B. Flow
November 2019 Rosemount 398
Rosemount 398 9
Figure 4: Pipe "Y" Installation
A. 1½-in. x 1-in. reducing bushing
Figure 5: Insertion Installations for Rosemount 398
You can insert the Rosemount 398 into a tee, such as the one shown here (PN 2002011, 1 ½-in. tee with 1-in. threaded process
connection), for angle or straight process flow. Other tees are available; see Accessories for part numbers.
A. 1½-in. socket x 1-in. FNPT reducer. CPVC schedule 80 three places.
B. 1½-in. tee CPVC schedule 80.
C. Angle flow.
D. Straight flow.
E. PN 2002011.
Rosemount 398 November 2019
10 /Rosemount
Figure 6: Rosemount 398 Insertion/Submersion Sensor Dimensional Drawing
You can place the process connector onto the Rosemount 398 with the threads facing down for insertion mounting into a tee or
the threads facing up for a submersion pipe mount connection.
A. Cable.
B. Kit: 1-in. swage fitting PN 23166-00 316 stainless steel or PN 23166-01 titanium with Teflon ferrule and EPDM O-ring. Order as
separate line items.
C. 1⅜-in. hex.
D. 1½-in. hex.
E. Caution label. Install caution label as shown on insertion fitting for all insertion applications. Label must be visible at all times. For
submersion applications, note limits and remove label.
F. 1-in. x 1-in. NPT male connector typical.
November 2019 Rosemount 398
Rosemount 398 11
Submersion installations for Rosemount 398
Figure 7: Submersion Installation
A. Type 4X junction box
PN 22715-02 (without preamp)
PN 23309-03 for use with preamp (3K)
PN 23309-04 for use with preamp (Pt100)
B. 2-in. pipe mounting bracket PN 2002565
C. Flexible conduit if required
D. 1-in. pipe by others
E. 1-in. FNPT CPVC union PN 9320057
F. 1-in. MNPT connector PN 23166-00
Rosemount 398 November 2019
12 /Rosemount
Figure 8: Submersion Installation: Handrail Mounting Accessory (PN 11275-01)
A. Sensor cable.
B. 1½-in. PVC pipe schedule 80.
C. 1½-in. pipe clamp, three places.
D. 45 degree sweep ell extension pipe.
E. Regularly check to make sure connections are water tight.
F. Unistrut 1⅝-in. x 1⅝-in. aluminum.
G. 1½-in. pipe clamp, two places.
H. Can be any convenient dimension.
I. Customer handrail, two places.
J. Mounting channel aluminum, two places.
K. Locking pin with bead chain.
Note
Unless otherwise specified.
Note
You can submerse the Rosemount 398 in ponds or tanks in various ways, including a customer-supplied pipe mount setup using PN
9330022 pipe mount union. You can also use the handrail mounting assembly (PN 11275-01), which includes all necessary parts to
mount the sensor at the end of a pipe using a process connector (PN 23166-00 or 23166-01).
November 2019 Rosemount 398
Rosemount 398 13
Figure 9: Rosemount 398R with and without Optional Ball Valve PN 23765-00 Dimensional Drawing
A. Dimension (see Table 7)
B. Dimension (see Table 7)
C. Knurl retainer
D. Packing adapter
E. Ball valve
F. 1¼-in. MPT close nipple
G. Ball valve kit PN 23765-00
H. Housing titanium
I. Retraction stop collar
J. Electrode housing
K. pH/ORP electrode
Table 7: Rosemount 398R A and B Dimensions
Option A (in./mm) B (in./mm)
21 21.60/548.64 12.12/307.85
25 36.10/916.94 26.62/676.15
Note
Add five inches to dimension A if mounting a sensor head junction box onto the sensor.
Rosemount 398 November 2019
14 /Rosemount
Figure 10: Rosemount 398R with and without 1½-in. Ball Valve PN 23240-00 Dimensional Drawing
A. Dimension (see Table 8).
B. Dimension (see Table 8).
C. Dimension (see Table 8).
D. Cable.
E. Cable bushing polypropylene.
F. Hex nut.
G. 1-in. x 1-in. male connector.
H. WARNING
Residual pressure and process may remain trapped between ball valve and male connector.
Pressure/temperature rating: 150 psig at 100 °C (100 psig at 100 °C for flat glass)
Maximum pressure at retraction: 64 psig (option 21), 35 psig (option 25)
I. Housing titanium.
J. Retraction stop collar.
K. Electrode housing.
L. pH/ORP electrode.
M. Ball valve kit (PN 23240-00) optional.
N. 1½-in. x 1-in. FPT reducing coupling.
O. 1½-in. MPT close nipple.
P. 1½ FPT ball valve.
Q. Ball valve kit (PN 23240-00) used with Rosemount 398R retractable sensor.
R. You must use a process connector (PN 23166-00 or -01) to connect the sensor to ball valve kit 23240-00. You can purchase the
process connector separately.
November 2019 Rosemount 398
Rosemount 398 15
Table 8: Rosemount 398R A, B, and C Dimensions
Option A (in./mm) B (in./mm) C (in./mm)
21 21.60/548.64 12.90/327.66 22.27/565.66
25 36.10/916.94 27.40/659.96 36.77/933.96
Note
For the ball valve installation shown, you must purchase the ball valve kit (PN 23240-00) and 1-in. x 1-in. process connector (PN
23166-00 or 23166-01) separately.
Note
Add five inches to dimension A if mounting a sensor head junction box onto the sensor.
Rosemount 398 November 2019
16 /Rosemount
Figure 11: Rosemount 396VP and 398VP with Process Connector Dimensional Drawing
A. Cable with Variopol receptacle (female) connector PN 24281-00.
B. Sensor body.
C. 1-in. swage fitting process connector assembly PN 23166-00/01.
D. 1-in. NPT.
E. Optional flat bulb sensor.
F. Standard hemi bulb sensor.
G. Retraction stop collar.
H. Sensor body.
I. Variopol plug (male) connector.
J. Metal process connector PN 23166-xx (x = 00 for 316 stainless steel and xx = 01 for titanium) can be used for insertion or
submersion mounting of Rosemount 396VP or 398VP sensors in 1-in. fittings.
K. The metal process connector gives the sensor various insertion depths, depending on where you locate the compression fitting. You
can also switch the threads to face the cable end of the sensor for connection to submersion pipes.
November 2019 Rosemount 398
Rosemount 398 17
Wetted materials
1. Rosemount 396VP:
Sensor body: 316 stainless steel
Reference junction: polypropylene O-ring EPDM
2. Rosemount 398VP:
Sensor body: titanium
Reference junction: Tefzel.
O-ring: Kalrez®
, EPDM, or Viton®
Typical flow-through and insertion mounting configuration for Rosemount 396VP and 398VP
Figure 12: Angle Flow
A. Variopol plug (male) connector
B. Cable with Variopol receptacle (female) connector
C. 1½-in. pipe tee with 1-in. threaded connections PN 2002011
D. Flow
Figure 13: Straight Flow
A. 1½-in. pipe tee with 1-in. threaded connections PN 2002011
Rosemount 398 November 2019
18 /Rosemount
Figure 14: Pipe "Y" Installation
A. 1½-in. x 1-in. reducing bushing
B. 1½-in. pipe "Y"
November 2019 Rosemount 398
Rosemount 398 19
Figure 15: Rosemount 396RVP and 398RVP with Optional 1½-in. Ball Valve PN 23240-00 Dimensional Drawing
A. Dimension (see Table 9 and Table 10).
B. Dimension (see Table 9 and Table 10).
C. Variopol plug (male) connector.
D. 1-in. x 1-in. swage fitting kit (PN 23166-00 or 23166-01) required to connect sensor directly to process or to ball valve.
E. WARNING
Residual pressure and process may remain trapped between ball valve and male connector.
Pressure/temperature rating:
Hemi bulb: 150 psig at 100 °C
Flat bulb: 100 psig at 100 °C
Maximum pressure of retraction:
64 psig (option 21)
35 psig (option 25)
F. Titanium housing.
G. Retraction stop collar.
Rosemount 398 November 2019
20 /Rosemount
H. Electrode housing.
I. Table 9: Accuglass Flat pH Glass Bulb
Option A (in./mm) B (in./mm)
21 12.65/321,31 23.69/606,81
25 27.15/689,15 38.39/975,11
J. Table 10: Accuglass Hemi pH Glass Bulb
Option A (in./mm) B (in./mm)
21 12.63/320.55 24.14/613.6
25 27.12/668.85 38.64/981.46
K. 1½-in. FPT ball valve PN 9340065.
L. 1½-in. MPT close nipple.
M. 1½-in. x 1-in. FPT reducing coupling.
N. Ball valve kit (Pn 23240-00) optional.
O. Ball valve kit (PN 23240-00) used with Rosemount 396RVP and 398RVP retractable sensors.
P. A process connector (PN 23166-00 or -01) must be used to connect the sensor to ball valve kit 23240-00. You can purchase the
process connector separately.
November 2019 Rosemount 398
Rosemount 398 21
Typical submersion installations for Rosemount 396VP and 398VP
Figure 16: Pipe Mounting Union
The pipe mounting union (PN 9330022) is ideal for connecting a sensor to a pipe, tank, aeration basin,or open channel.
A. Type 4x junction box
PN 22715-02 (without preamp)
PN 23309-03 for use with preamp (3K)
PN 23309-04 for use with preamp (PT100)
B. 2-in. pipe mounting bracket PN 2002565
C. Flexible conduit if required
D. 1-in. pipe by others
E. 1-in. FNPT CPVC union PN 9320057
F. 1-in. MNPT connector PN 23166-00
You can use the sensor handrail mounting assembly (PN 11275-01) to insert the sensor into tanks and ponds; the assembly mounts
easily on most handrails.
Rosemount 398 November 2019
22 /Rosemount
Figure 17: Submersion Installation: Handrail Mounting Accessory (PN 11275-01)
A. Sensor cable.
B. 1½-in. PVC pipe schedule 80.
C. 1½-in. pipe clamp, three places.
D. 45 degree sweep ell extension pipe.
E. Regularly check to make sure connections are water tight.
F. Unistrut 1⅝-in. x 1⅝-in. aluminum.
G. 1½-in. pipe clamp, two places.
H. Can be any convenient dimension.
I. Customer handrail, two places.
J. Mounting channel aluminum, two places.
K. Locking pin with bead chain.
Note
Unless otherwise specified.
November 2019 Rosemount 398
Rosemount 398 23
Figure 18: Nylon Process Connector
The nylon process connector has process threads that you can use for submersion pipe or in-line tee mounting.
A. Cable with Variopol receptacle (female) connector.
B. Variopol plug (male) connector.
C. 1-in. x 1-in. NPT male connector nylon PN 9510066.
D. Grommet.
E. Compression fitting.
F. Housing.
G. Caution label removed for submersion service. First note limits; then remove and discard label.
H. Retraction stop collar.
I. pH electrode.
Rosemount 398 November 2019
24 /Rosemount
Figure 19: Rosemount 396RVP and 398RVP with Optional 1¼-in. Ball Valve PN 23765-00 Dimensional Drawing
A. Dimension (see Table 11)
B. Dimension (see Table 11)
C. Dimension (see Table 11)
D. Cable with Variopol receptacle (female) connector
E. Variopol plug (male) connector
F. Housing titanium
G. Retraction stop collar
H. Electrode housing
I. pH/ORP electrode
J. 1¼-in. MPT close nipple
K. Ball valve
L. Packing adapter
M. Knurl retainer
N. Ball valve kit PN 23765-00
Table 11: Rosemount 396RVP and 398RVP A, B, and C Dimensions
Option A (in./mm) B (in./mm) C (in./mm)
21 21.60/548.64 12.12/307.85 24.95/633.73
25 36.10/916.94 26.62/676.15 39.45/1002.03
November 2019 Rosemount 398
Rosemount 398 25
Accessories
Table 12: Ball Valve Assembly
Part number Description
23240-00 Ball valve assembly, 316 stainless steel, 1½-in. (process connector required)
23765-00 1¼-in. ball valve assembly
Table 13: Connector Cable (Required for all First Time Installations)
Part number Description
24281-00 15-ft. (4.6 m) VP8 cable
24281-01 25-ft. (7.6 m) VP8 cable
24281-02 2.5-ft. (0.8 m) VP8 cable
24281-03 50-ft. (15.2 m) VP8 cable
24281-04 100-ft. (30.5 m) VP8 cable
24281-05 4-ft. (1.2 m) VP8 cable
24281-06 10-ft. (3 m) VP8 cable
24281-07 20-ft. (6.1 m) VP8 cable
24281-08 30-ft. (9.1 m) VP8 cable
Table 14: Extension Cables (Reuqires a Remote Junction Box)
Part number Description
23646-01 Extension cable, 11-conduit, shielded, prepped, per foot
9200254 Cable, 4 conduit, 22 AWG, 2 shielded pair, per foot
9200273 Extension cable, 11-conduit, shielded, unprepped, per foot
Table 15: Mounting Assemblies
Part number Description
11275-01 Handrail mounting assembly
2002011 CPVC flow-through tee, 1½-in. NPT process connection
24091-00 Cell, low flow, ¼-in. inlet and outlet
Table 16: O-rings for Process Connectors (Optional)
Part number Description
9550220 O-ring, 2-214, Kalrez, for process connector
Table 17: Process Connectors (Required for all First Time Installations)
Part number Description
23166-00 Connector, 1-in. x 1-in. 316 stainless steel with O-ring groove
23166-01 Connector, 1-in. x 1-in. titanium with O-ring groove
Rosemount 398 November 2019
26 /Rosemount
Table 18: Remote Junction Boxes
Part number Description
2002565 Mounting bracket kit
23555-00 Junction box, Rosemount 54/5081/1055/Xmt compatible preamplifier
Table 19: Sensor Head Junction Box
Part number Description
23709-00 Junction box, sensor head with preamplifier for Rosemount 54/3081
Table 20: Other Accessories
Part number Description